EV Charger Sockets for AC and DC Charging Stations
EV Charger Sockets for AC and DC Charging Stations
Component-level charging interfaces designed for OEM station integration, public infrastructure, and rapid retrofit projects. Engineered to deliver stable thermal performance, precise panel cutout matching, and seamless electronic lock compatibility across global standards.
- Supported Protocols: Type 1, Type 2, GB/T, CCS, and CHAdeMO
- Mounting Flexibility: Front and rear panel mount configurations
- Actuator Integration: 12V and 24V electronic lock matching
- พร้อมสำหรับการปฏิบัติตามกฎระเบียบ: Engineered to meet IEC 62196, CE, and RoHS requirements
Component-level charging interfaces designed for OEM station integration, public infrastructure, and rapid retrofit projects. Engineered to deliver stable thermal performance, precise panel cutout matching, and seamless electronic lock compatibility across global standards.
- Supported Protocols: Type 1, Type 2, GB/T, CCS, and CHAdeMO
- Mounting Flexibility: Front and rear panel mount configurations
- Actuator Integration: 12V and 24V electronic lock matching
- พร้อมสำหรับการปฏิบัติตามกฎระเบียบ: Engineered to meet IEC 62196, CE, and RoHS requirements
Engineering Reliable EV Charger Socket Solutions
หนึ่ง EV charger socket is a critical interface component that directly affects charging safety, thermal stability, maintenance frequency, and enclosure integration. For infrastructure developers and charger OEM teams, component consistency directly affects maintenance planning, assembly repeatability, and long-term network uptime.
When specifying components for a new build or an AC DC EV charging socket replacement, three engineering factors determine system success:
- Thermal Stability Under Continuous Load: Temperature-rise performance must be validated under rated current and continuous operating conditions. Material batches, plating consistency, and key dimensional points can be controlled through incoming inspection and production traceability procedures.
- Mechanical Durability: Public charging infrastructure demands high mating cycles. A robust terminal structure reduces wear and minimizes replacement frequency.
- Integration Flexibility: Matching the original cutout size and lock stroke is often more critical than rated current alone, especially in retrofit projects.
What matters most when choosing an EV charger socket?
- Correct standard compatibility: Type 1, Type 2, CCS, CHAdeMO, or GB/T.
- Stable thermal performance: Validated under rated current and continuous load.
- Integration dimensions: Matching cutout size and mounting method (front/rear).
- Actuator matching: Electronic lock compatibility with 12V or 24V control systems.
- Compliance documentation: Relevant test reports for target markets.
AC EV Charger Socket: Type 2 & Type 1 Panel Mounts
An AC EV charger socket is the vehicle-side receiving interface used in wallboxes and public AC charging stations for controlled alternating-current power delivery. In three-phase wallbox projects, front-mount socket alignment directly affects assembly efficiency on the production line.
AC socket selection should be based on target standard, current rating, mounting method, lock compatibility, and enclosure cutout constraints. The ZENCAR AC lineup covers global standards, offering precise cutout matching for various enclosure designs.
AC Socket Key Specifications:
| รายการ | ข้อกำหนด |
|---|---|
| มาตรฐาน | IEC 62196 Type 1 / Type 2 / GB/T |
| ปัจจุบัน | 16A / 32A/48A |
| เฟส | Single-phase / Three-phase |
| Mounting | Front panel mount / Rear panel mount |
| การป้องกัน | Up to IP54 in mated condition, depending on configuration and final integration |
| Lock Compatibility | 12V / 24V e-lock options |
DC EV Charger Socket: CCS & CHAdeMO High-Power Interfaces
A DC EV charger socket is a high-current charging interface designed for direct-current fast charging systems where thermal performance and signal reliability are critical. These interfaces are component-level parts for charger integration and replacement, rather than standalone DC charging systems. For maintenance teams, matching the exact mounting footprint is essential for rapid field replacements.
- Correct standard compatibility: Type 1, Type 2, CCS, CHAdeMO, or GB/T.
- Stable thermal performance: Validated under rated current and continuous load.
- Integration dimensions: Matching cutout size and mounting method (front/rear).
- Actuator matching: Electronic lock compatibility with 12V or 24V control systems.
- Compliance documentation: Relevant test reports for target markets.
DC Socket Key Specifications:
| รายการ | ข้อกำหนด |
|---|---|
| มาตรฐาน | CCS1 / CCS2 / CHAdeMO |
| Sensor Option | PT1000 / NTC thermistors integrated |
| แอปพลิเคชัน | DC fast chargers / High-power hubs |
| กรณีศึกษา | New station builds / Retrofit / Replacement |
